Guaranteed Fitment
Always the correct parts.
have questions?
Always the correct parts.
We know automotive.
Give us a call.
Get your parts fast.
It is finally time to get the power to the wheels with the cp-e Ford Focus RS PSMM! cp-e™ is proud to release the Focus RS Passenger Side Mount. Our Ford Focus RS PSMM has been a long time in the making. We are confident that these will be the last side mounts you will ever need.
The driver side engine mount brackets are made from 1/4” mild steel that is laser cut for precise fitment. The bushing housing is CNC machined from a solid block of aluminum. And like our rear motor mounts these bushings are made from rubber instead of urethane.
You have the power to choose your own durometer! We let you decide what degree of comfort vs stiffness you want to run. The 55A durometer is for the driver that is looking to get the power down to the ground without sacrificing too much comfort. The 70A durometer is more for those that drive their cars hard. No matter which durometer you chose the engine will have noticeably less movement from stock.
Say goodbye to wheel hop and torque steer when you combine this with our already popular rear motor mount.
In order to create a mount that works for all customers, we’re offering the driver’s side mount in 2 durometers. 55A will give you very little noticeable increase in vibrations while providing a large decrease in wheel hop and engine movement.
If stopping engine movement even with added vibrations over the 55A is the goal, the 70A durometer eliminates wheel hop even further. Both choices reduce wheelspin and provide a daily drivable ride.
To prevent corrosion and maintain an allover finish for the life of the product, we’ve anodized the Focus RS Driver Side Mount in a satin black.
This finish on the Focus RS Driver Side Mount not only looks great, but it will protect the mount for years to come.
Unlike nearly all other engine mount manufacturers, we use EPDM for our bushings. This provides much more vibration resistance when compared to polyurethane. This material is also extremely resilient and is able to stretch and even develop small cracks without affecting its structural integrity. EPDM is much more expensive to produce, but it is a far superior bushing material.
Our metal inserts are physically pressed into our EPDM bushings. This allows the bushing material and the metal to have a perfect connection without any gap. Other manufacturers cut their material out to fit, leaving small tolerances where the metal can still vibrate. Our construction allows the EDPM to absorb the vibrations and allows the metal inserts to smoothly move with the EDPM.
