Additives

In 4-stroke engines at each oil change; in 2-stroke engines, add when filling the oil/fuel tank. Shake well before use! Dosage: In 4-stroke engines or the transmission: 20ml (1 tube) is sufficient for 1liter (1 qt) of motor oil. In 2-stroke engines...

One 80 ml can is sufficient for 1-2 liters(0.25-0.5 gal.) of oil. Add Motorbike Engine Flush Shooter to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change...

LIQUI MOLY recommends adding Motorbike Radiator Cleaner to the cooling water if problems arise or before changing the coolant. Depending on the level of contamination, run the engine at operating temperature for 10-30 minutes. Drain the cleaner and flush...

Removes deposits from the fuel system, valves, spark plugs and the combustion chamber while preventing new deposit formation. Improves engine performance and lowers emissions. Provides corrosion protection throughout and prevents carburetor icing.

Aunique, state-of-the-art combination of acceleration-enhancing, cleaning, dispersing and material-protecting additives. Easy engine start, smoother running and better throttle response are the effects.

Add into the fuel tank. For optimum effect, add every time you refuel. Fully compatible with all grades of gasoline fuel. Contents of can are sufficient to treat up to 20 liters (5.2 gal.) of fuel. Minimum fuel filling of 15 liters (4 gal.) is requested...

Filling the dosage chamber (25 ml) once is sufficient for max. 5 liters (1.3 gal.) of fuel. Add to the fuel and repeat dosage after refueling. Also suitable for long-term use in seldom used engines. When decommissioning, add to the fuel and let the...

Removes deposits from the fuel system, valves, spark plugs and the combustion chamber while preventing new deposit formation. Improves engine performance and lowers emissions. Provides corrosion protection throughout and prevents carburetor icing.

Before applying, make sure to remove dirt, dust and grime so that filter is clean. Pour Motorbike Air Filter Oil into bucket or similar, then place filter into oil and make sure to work the oil into the foam part of filter (use proper hand protection)...

Place filter in a suitable vessel. Mix cleaner with water. Depending on the degree of contamination, the dosage must be between 1:5 and 1:10 (1 part cleaner to 5 to 10 parts water). Plunge the filter entirely into the cleaning solution and allow to work...

Maintains and cleans helmets and visors. Active anti-fog treatment for glass or plastic visors. With long-lasting effect. Removes dirt, insects, oil and siliconefilms. Provides clear vision and safety.

Royal Purple Max-Clean Fuel System Cleaner & Stabilizer - 20oz