Carburetors

Edelbrock Part #15032 Tensioner Upgrade Kit is engineered to handle the increased belt stress encountered in high horsepower Edelbrock applications. This kit is an upgrade for part #1596, #1599 & #15997 Edelbrock Supercharger Systems.

Edelbrock #7373 is a Complete Gasket Set for installing Performer RPM Cylinder Heads on Oldsmobile V8 engines. The set includes Cylinder Head, Exhaust, Intake, Water Outlet, and Valve Cover Gaskets. End seals are not included in this kit.

Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford and dual-quad applications such as our new RPM Dual-Quad Air-Gap, Edelbrock C-26, F-28 and Street Tunnel Ram. For single carb...

Chevrolet:Big-Block Mark IV:396 (6.6L)/402 (6.6L)/427 (7.0L)/454 (7.4L)/502 (8.2L);Chevrolet:Small-Block Gen I:265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

Throttle Lever Adapter Number 1481 fits 1966 and later Chryslers. Number 1483 is for Ford automatic transmission equipped vehicles with cable operated throttle (except A.O.D.). Both accept cruise control. Use with appropriate throttle cable plate when...

Repositions stock throttle cable bracket to align with Edelbrock carb throttle arm. Use with Edelbrock Throttle Lever Adapter #1483 and stock throttle cable bracket. Designed for Fords with cable activated throttle and automatic transmission kickdown rod.

Repositions stock throttle cable bracket to align with Edelbrock carb throttle arm. Use with Edelbrock Throttle Lever Adapter #1483 and stock throttle cable bracket. Designed for Fords with cable activated throttle and automatic transmission kickdown rod...

Repositions stock throttle cable bracket to align with Edelbrock carb throttle arm. Use with Edelbrock Throttle Lever Adapter #1483 and stock throttle cable bracket. Designed for Fords with cable activated throttle and automatic transmission kickdown rod.

Repositions stock throttle cable bracket to align with Edelbrock carb throttle arm. Use with Edelbrock Throttle Lever Adapter #1483 and stock throttle cable bracket. Designed for Fords with cable activated throttle and automatic transmission kickdown rod...

Throttle Lever Adapter Number 1481 fits 1966 and later Chryslers. Number 1483 is for Ford automatic transmission equipped vehicles with cable operated throttle (except A.O.D.). Both accept cruise control. Use with appropriate throttle cable plate when...

Edelbrock Part #15028 Tensioner Upgrade Kit is engineered to handle the increased belt stress encountered in high horsepower Edelbrock applications. This kit is an upgrade for part #1597 Edelbrock Supercharger System.

This manifold allows the use of square-bore carbs such as the Edelbrock Performer Series or Thunder Series AVS 500 cfm on the 1949-1953 Ford Flathead engine. This is a reproduction of the vintage Edelbrock #452 two-piece manifold with a new carb adapter...