We are proud to introduce “Switch on the Fly” (SOTF), the world’s first integrated ECM map switching solution for Ford 6.0L diesel vehicles! This feature has been designed to work seamlessly with your vehicle as if it was included from the factory. Follow these simple instructions to configure the feature on your calibration and learn how to utilize the switching interface.
Using Switch on the Fly
Step 1: Meet switching requirements
Vehicle must be equipped with cruise control hardware and steering wheel.
Vehicle must be On or Running, and Cruise Control must be deactivated.
Step 2: Activate the Switching Menu
Action | Result |
Press the Coast button | Tach displays Active Slot (x1000) for 3 seconds |
Switching slots is now available for 10 seconds | |
Step 3: Now that we’re activated
Action | Result |
Press the Resume button | Active Slot increased by 1 Tach displays Active Slot (x1000) for 3 seconds |
Press the Set/Accel button | Active Slot decreased by 1 Tach displays Active Slot (x1000) for 3 seconds |
Active Slot will be limited to the Max Allowed Slots calibration setting | |
Step 4: Deactivate the Switching Menu
Action | Results |
The switching menu will automatically deactivate after 10 seconds if no buttons are pressed | |
Press the Coast button (display active) Press the Coast button (display inactive) | Deactivates switching menu, restores tach Tach displays Active Slot (x1000) for 3 seconds |
Click the link below for 6.0L SOTF:
Frequently Asked Questions
Q: Can I use this feature with an aftermarket steering wheel?
A: Maybe. This feature requires the factory cruise control buttons to work properly.
Q: I forgot what slot I’m currently in, how can I tell which slot is active?
A: Use VCM Scanner to monitor the “Active Slot” parameter or press the “Coast”
button.
Q: I shut off the car in Slot 3, and when I started it back up the Active Slot was 3! How
did that happen?
A: We thought it’d be cool if this feature remembered your previous slot and restored it
for you on startup.