Additives

To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the fuel automatically. Minimum fuel filling of 25 liters...

Keeps rubber and plastic seals in hydraulic power steering systems soft and pliable. Leaks caused by hardened and brittle seals are prevented or eliminated. Cleans internal oil passages to allow proper oil flow, reduces noise levels and extends service...

For best results and long-term effect add DPF protector every 2.000 km (1.200 miles). One 500 ml can is sufficient for 115 liters (30 gal.) of Diesel. Minimum fuel filling of50 liters (14 gal.) is requested for optimum product performance.Product...

An effective mixture of additives that clean and maintain diesel fuel systems. Prevents corrosion, increases lubrication thus reduces fuel pump and injector wear. Increases Cetane value for improved engine performance, easier starting and lower emissions...

To be added directly into the fuel tank. Use aspreventive or to cure acute engine problems. The product mixes with the fuel automatically. Minimum fuel filling of 25 liters (7 gal.) is requested for optimum product performance. Contents of Can sufficient...

Aneffective mixture of additives to clean and maintain the fuel system of port injected and carburetedgasoline engines. Cleans injectors, the combustion chamber and protects against corrosion. Restores proper fuel atomization and improves engine...

To prepare, attach tube with nozzle. To gain access, remove hose or pipe immediately before throttle housing. The engine needs to run to perform cleaning. If unable to start engine, disconnect air mass sensor connector while the ignition switch is in off...

Can contents (300 ml) are sufficient for up to5 liters (5.28 U.S. QT)of motor oil. After adding to the motor oil, allow the engine to run warm. The product can be added at any time. Minimum oil filling of 3 liters (3.17 U.S. QT) is requested for optimum...

One 80 ml can is sufficient for 1-2 liters(0.25-0.5 gal.) of oil. Add Motorbike Engine Flush Shooter to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change...

Aunique, state-of-the-art combination of acceleration-enhancing, cleaning, dispersing and material-protecting additives. Easy engine start, smoother running and better throttle response are the effects.Installation InstructionsMaterial Safety Data Sheet

For best results and long-term effect add DPF protector exery 2.000 km (1.200 miles). One 300 ml can is sufficient for 75 liters (20 gal.) of Diesel. Minimum fuel filling of50 liters (14 gal.) is requested for optimum product performance.Product...

Industrial Injection Deuce Juice Winter Blend - Case of 12