How to read your stock file with HPT MPVI2/RTD

After you hook your device up to the vehicle, it will power on.

• First download vcm suite: https://www.hptuners.com/downloads/
• After you have downloaded and installed the vcm suite. Open vcm editor
• Once the program is open and you are connected to the vehicle. Select help and resycn interface. This will sync the interface with the software.

• Next Select the Green chip (under help tab) and select the modules you wish to read. If both ECM & TCM are available you’ll need to make sure both are selected.

• Once you have read the file, it will prompt you to save the file. Please save it as following, last name year model. Example Smith2018MustangGT

How to load tunes to your HPT MPVI2/RTD 

• After we have sent back the tune file to you. Open the vcm editor and select file open and select the tune file.
• Next to where the Green chip was will now be a Red Chip. Select the Red chip to start the flash process.

• The first time flashing will prompt you to license to the vehicle. These credits would have been purchased in addition to the tuning. **Be sure to note from the email either to write calibration or write entire**