Push Rods

This 7/16" diameter, .165" wall pushrod incorporates technology developed in NHRA/NASCAR engines. 9.200" long with a 5/16" ball end and 210 radius, this pushrod handles extreme valvetrain setups better than standard 1000 series pushrods.CatalogUser 1

radius, 5/16" ball end. The radii on each end provide additional clearance for the Rocker adjuster at high lift and allow the pushrods to be installed either "up" or "down". The pushrods have a consistent .165" wall thickness, even in the tapered ends,...

radius, 5/16" ball end. The radii on each end provide additional clearance for the Rocker adjuster at high lift and allow the pushrods to be installed either "up" or "down". The pushrods have a consistent .165" wall thickness, even in the tapered ends,...

These 7/16" diameter, .165" wall pushrods incorporate technology developed in NHRA/NASCAR engines. 9.100" long with a 5/16" ball end and 210 radius, these pushrods handle extreme valvetrain setups better than standard 1000 series pushrods.CatalogUser 1

radius, 5/16" ball end. The radii on each end provide additional clearance for the Rocker adjuster at high lift and allow the pushrods to be installed either "up" or "down". The pushrods have a consistent .165" wall thickness, even in the tapered ends,...

radius, 5/16" ball end. The radii on each end provide additional clearance for the Rocker adjuster at high lift and allow the pushrods to be installed either "up" or "down". The pushrods have a consistent .165" wall thickness, even in the tapered ends,...

These 7/16" diameter, .165" wall pushrods incorporate technology developed in NHRA/NASCAR engines. 9.000" long with a 5/16" ball end and 210 radius, these pushrods handle extreme valvetrain setups better than standard 1000 series pushrods.CatalogUser 1

This 7/16" diameter, .165" wall pushrod incorporates technology developed in NHRA/NASCAR engines. 9.000" long with a 5/16" ball end and 210 radius, this pushrod handles extreme valvetrain setups better than standard 1000 series pushrods.CatalogUser 1

radius, 5/16" ball end. The radii on each end provide additional clearance for the Rocker adjuster at high lift and allow the pushrods to be installed either "up" or "down". The pushrods have a consistent .165" wall thickness, even in the tapered ends,...

radius, 5/16" ball end. The radii on each end provide additional clearance for the Rocker adjuster at high lift and allow the pushrods to be installed either "up" or "down". The pushrods have a consistent .165" wall thickness, even in the tapered ends,...

These 7/16" diameter, .165" wall pushrods incorporate technology developed in NHRA/NASCAR engines. 8.900" long with a 5/16" ball end and 210 radius, These pushrods handle extreme valvetrain setups better than standard 1000 series pushrods.CatalogUser 1

radius, 5/16" ball end. The radii on each end provide additional clearance for the Rocker adjuster at high lift and allow the pushrods to be installed either "up" or "down". The pushrods have a consistent .165" wall thickness, even in the tapered ends,...