Engine Components

Experience increased handling and better performance on your sway bar equipped vehicle when you tighten up its suspension with anti-sway bar hardware kits from Ford Racing. These complete hardware kits include all necessary hardware, end links, and...

These Ford Racing ring gear bolts are just what you need when replacing or upgrading your ring gears. Don't use that old, unreliable hardware when you can replace it with new. These bolts can also be used for automatic transmission flywheels.This Part...

these Ford Racing flywheel bolts allow you to bolt in your flywheel with confidence. They are a stock replacement part, so you can be sure that they'll fit your Ford engine with manual transmission flywheels.This Part...

Ford Racing high-rpm ignition pulse rings power up your Ti-VCT engine. These pulse rings are modified to support higher rpm engine builds and extend rpm range from 7,700 to 8,100 rpm. Do you need parts for your Ford? The best and only choice should be...

Fits late, Gen 2 (2016-2017 MY) 5.0L Coyote Engines. This engine harness is used with automatic transmission vehicles. Allows the engine to be used in conjunction with an automatic transmission. Harness connector is compatible with Ford 6R80 automatic...

This is the replacement short PCV hose for the Ford Performance Coyote air/oil separators M-6766-A50 and M-6766-A50A.This Part Fits:YearMakeModelSubmodel2011-2014FordF-150FX22011-2014FordF-150FX42011-2014FordF-150King...

This Is The Replacement Long PCV Hose For The Ford Performance Parts Coyote Air/Oil Separators M-6766-A50 And M-6766-A50AThis Part Fits:YearMakeModelSubmodel2011-2014FordF-150FX22011-2014FordF-150FX42011-2014FordF-150King...

This replacement slip yoke eliminator (SYE) housing from Rugged Ridge comes without the tail shaft bearing. Reduces drive line angle and shortens the output shaft by 5 inches. East to install.WarrantyThis Part...

This kit is a MUST if you installed a 2 in. or taller suspension lift in your 1987-2006 Jeep Wrangler (not needed for body lifted Jeeps). The kit fits all newer production NP 231 transfer cases (1987- up). A Slip Yoke Eliminator Kit (SYE) will eliminate...

This Mega Short Slip Yoke Eliminator Kit is perfect for those extra tall suspension lifts. The purpose of this kit is to replace the slip yoke portion of the NP 231 with a fixed-yoke, CV style drive shaft assembly. This is the most and strongest kit...

Over time, the yoke on your SYE kit can wear out or break from extensive off-roading. Now offered as a separate component, this Mega Short SYE yoke from Rugged Ridge offers a reliable replacement and fits the Rugged Ridge 18676.70 and 18676.72 Slip Yoke...

Rugged Ridge is an exciting brand developed to provide quality and functional Jeep accessories for the growing Jeep aftermarket. As a Division of Omix-ADA, the leader in replacement parts for Jeep vehicles, the Rugged Ridge pedigree is well established...