Bushing Kits

Service a wide range of bushings with this versatile press set. Our 29 piece kit will allow you to efficiently remove and install bushings from 1 1/2" to 3" OD (36-80mm ). Save time by servicing the suspension bushings on the vehicle vs. removing...

Easily replace press-in type control arm bushings on many domestic and imported vehicles with this service kit. Mechanical power screw quickly and easily removes worn bushings and installs them without damaging the control arm. Set included C-Frame,...

This proprietary SpecRide bushing replacement kit provides superior performance and durability for your 25560 Nissan Titan arms. Each kit includes 8 SpecRide bushings with free moving pivot sleeves designed to survive the toughest environments and...

Upgrade your older SPC arms to the latest design with this complete bushing retrofit kit. These xAxis joints feature free pivoting inner balls to maximize droop travel and are greased & booted to protect against contaminants. The bonded rubber outer...

Upgrade your older SPC arms to the latest design with this complete bushing retrofit kit. These xAxis joints feature free pivoting inner balls to maximize droop travel and are greased & booted to protect against contaminants. The bonded rubber outer...

This sleeve will easily change Camber and/or Caster 1.25˚ for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change...

This sleeve will easily change Camber and/or Caster .75˚ for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change needed...

This sleeve will easily change Camber and/or Caster .50˚ for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change needed...

This sleeve will easily change Camber and/or Caster .25˚ for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change needed...

Replace your worn fronter lower control arm bushings on the 2018 and newer Jeep Wrangler (JL) or Gladiator (JT) with this replacement bushing from SPC. Sold each, use two bushings per control arm, up to four per vehicle. Need caster or front pinion angle...

Replace the worn bushing on the inboard side of the rear lower control arm on many Subaru models from the 2000's to present. Need the toe cam adjuster too? Check out SPC part number 67668 for many 2000 to 2009 models. Part replaces OE #'s 20254AE01A...

Replace failed cross axis balljoints on the rear upper control arm of GM's popular Lambda platform vehicles with SPC's replacement xAxis ball joint. California Residents WARNINGThis Part...