Camber Kits

This sleeve puller will pull both O.E. and most aftermarket camber/caster sleeves quickly and efficiently, usually without damaging the ears of the sleeve. Heat treated high strength steel. Single-unit design with no loose parts. California Residents...

Replace the non-adjustable rear upper control arm on the Nissan Altima with SPC's fully adjustable arm to get +-2.5deg of camber change. This remove and replace arm is perfect for traditional alignment correction, to enhance handling, or as a direct...

This is the perfect kit for lowered Zs or G35s and G37s Infinitis. Provides additional camber and comes with a larger offset toe cam to bring the toe angle back into range. Use the 85130 rotary file to elongate the toe slots. California Residents...

This is the perfect kit for the lowered Z or G35. Provides additional camber and comes with a larger offset toe cam to bring the toe angle back into range. Use the 85130 rotary file set to elongate the toe slots. California Residents WARNINGInstallation...

With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to...

With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to...

With these shims you can correct both rear camber and rear toe on newer Volkswagens and Audis. By combining the shims (two may be used on each wheel) you can get up to 1.0 camber change and up to .50 toe change. Our wrench (87530) is a must when...

Extend total toe cahnge on many Scion, Lexus, and Toyota models with SPC's replacement rear toe adjustment arm. Many of these mondels come with factory adjustment but need more due to factory recalls, lowering, or collision repair. SPC's remove & replace...

This adjustable arm increases the amount rear toe can be changed on this popular performance vehicle. It is recommended that this arm be installed when either the 67765 or 67775/67776 is being installed. California Residents WARNINGInstallation...

This replacement front adjustable strut rod is easily adjustable and gives these popular tuner vehicles the ability to change caster by 3deg. A stiffer rubber bushing material provides better handling in performance applications. California Residents...

Add camber adjustment to the rear of your Honda Odyssey with SPC's patented camber bolt. Simply replace the rear lower control arm bolt with SPC's bolt and get +-0.5deg of camber change to get the vehicle back within specification. SPC uses a hex...

Extend your toe adjustment range on the rear of many popular Honda and Acura models. SPC's extended cam kit more than doubles the change available, you will be able to get +-2.5deg toe change. This cam bolt features a hex chromate free finish that offers...