Brake Hardware

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with black e-coat finish.

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with black e-coat finish.

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These solid steel t-nuts are available in different thickness and bolt hole sizes.

Wilwood’s Pad Shim Kits feature a steel and elastomeric construction that dampens vibration transmitted between the rotor and pad. This is an industry standard to reduce NVH (Noise, Vibration and Harshness) response in vehicle platforms. Shim kits...

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with black e-coat finish.

Wheel Spacer and Hub Protector. With a wheel bolt circle of 5 x 4.00”/4.50”/4.75” and a .090 thickness. Engineered from high strength steel alloy and with a plated finish.

Floating Rotor Adapter for Asphalt Racing Hubs with “backside” mounts. With a hub mount bolt circle of 5 x 5.00” and will mount any 8 x 7.00” bolt circle rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard...

Bridge Bolt Tubes for various Wilwood calipers with a .260” ID, .500” OD and various lengths for specific caliper styles and rotor width. Made from high strength aluminum alloy and anodized for corrosion resistance or a bright polished finish.

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Superlite Calipers using .65” thick pads.

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Superlite Calipers using .65” thick pads.

Caliper Bridge Spacer Kits contain bolts, bridge spacer and other hardware to convert Narrow Dynalite, Narrow Dynapro and Forged Narrow Dynalite Calipers to different rotor widths. 300-6588 will convert 0.38 and 0.81 to 1.25” wide rotor width, 300-6589...

Caliper Bridge Spacer Kits contain bolts, bridge spacer and other hardware to convert Narrow Dynalite, Narrow Dynapro and Forged Narrow Dynalite Calipers to different rotor widths. 300-6588 will convert 0.38 and 0.81 to 1.25” wide rotor width, 300-6589...