Guaranteed Fitment
Always the correct parts.
have questions?
Always the correct parts.
We know automotive.
Give us a call.
Get your parts fast.
Your Complete Ford 6.0L Tuning Solution:
The Chimera is a USB and Bluetooth link between you and your 6L Power Stroke. Use your laptop, phone, or tablet to tune, view live data, and datalog your 6L Power Stroke.
FICM Tuning
ECM/TCM Tuning
Live Data
Datalogging
**Requires the use of a Windows laptop or iPhone.**
Chimera is Power Hungry Performance's wireless vehicle programming interface — a compact OBDII module that links your Powerstroke's ECM and FICM to the Chimera Connect app over a high-speed CAN bus.
Built around the ESP32 platform, Chimera connects to your phone over Bluetooth Low Energy. Plug it into the OBDII port, open Chimera Connect on your iPhone or Android, and the app finds your Chimera, brings the CAN bus online, and reads what's on the truck — no COM ports, no proprietary cables, no laptop.
Whether you're flashing a fresh calibration on the bench or pulling up a customer's truck on the lot, Chimera and the app go where you go.
Chimera's integrated OBDII male connector plugs directly into your truck's diagnostic port and powers up from the vehicle's 12V — no external batteries, wall warts, or breakout boxes. On the bench, power it from a 12V harness to program modules off the vehicle.
Open Chimera Connect on your iPhone or Android and tap connect. The app scans for your Chimera over Bluetooth, links up, and reports its firmware version — no pairing codes, no COM ports. The device shows up simply as "Chimera."
Chimera reads the modules on the truck, and the app registers your ECM and FICM to your garage. Your trucks, modules, unlocks, and flash history live in your account — sign in on any phone and they're right there.
Pick from the tunes that match your calibration, unlock a module with tokens, and flash your ECM or FICM over Bluetooth. Save a stock backup first, watch progress live, and review every flash in your module's history.
A flash writes directly to your module, so keep your phone near the Chimera and your truck's battery healthy — or on a charger — for the whole operation. Chimera Connect walks you through each step and saves a stock backup you can always return to.
Read and flash the Powerstroke ECM — cal-only or full calibration — straight from your phone. Chimera handles the CAN protocol and timing that production ECM flashing demands, all over Bluetooth.
Program FICM strategies with the precise CAN timing FICM hardware requires. Tested write timing delivers consistent, reliable FICM writes — right from the Chimera Connect app.
Browse the tunes that fit your truck's calibration right in the app. Unlock a module's library with tokens, then flash. Your purchases and unlocks stay tied to your account, on any device.
Save a factory backup before you flash and return to it any time. Every flash is logged to your module's history, so you always know exactly what's on the truck.
Chimera's four status LEDs give you immediate visual feedback on what the module is doing — without ever looking at your phone.
Pulses steadily when the pass-thru firmware is running. If it's blinking, the brain is alive.
Flashes each time a CAN frame matching your acceptance filter is received from the vehicle bus.
Solid when Chimera is connected to the app. Blinks as messages pass between your phone and the module over Bluetooth.
Illuminates whenever the 18V programming voltage is active — your warning that a flash operation is live.
Chimera links to your phone over Bluetooth. For the steadiest connection — especially during a flash — keep your phone close to the truck and away from heavy 2.4 GHz interference. Keeping nearby Wi-Fi on 5 GHz helps too.
Chimera runs on the vehicle's 12V through the OBDII port — plug in and go. On the bench, power it from a 12V harness to work on modules off the vehicle.
Trucks, modules, tunes, unlocks, and flash history live in your Chimera Connect account — not on one phone. Sign in on a new device and everything's there, ready to go.
Chimera's firmware is field-upgradeable, and Chimera Connect reads your module's firmware version every time it connects — so you always know you're current as new features and fixes ship.
| Vehicle Interface | OBDII (J1962) male connector, integrated |
| Vehicle Bus | High-Speed CAN (TWAI) with configurable acceptance filter |
| Programming Voltage | 18V FEPS (Ford EEPROM Programming Supply) — switched on demand |
| Host Connectivity | Bluetooth Low Energy (BLE) — pairs with the Chimera Connect app |
| Bluetooth Identity | Advertises as "Chimera" (no pairing code required) |
| Companion App | Chimera Connect for iOS & Android |
| Power Source | 12V from the OBDII port (or a 12V bench harness) |
| Status Indicators | 4 LEDs — Heartbeat, CAN RX, App Link, 18V FEPS Active |
| Processor Platform | Espressif ESP32 |
| Firmware Updates | Field-upgradeable; version reported to the app on every connect |
| Supported Modules | Powerstroke ECM (cal-only and full flash) & FICM |
| Mobile OS Support | iOS & Android — via the Chimera Connect app |
