Gauges & Pods

For use with Full Sweep and Short Sweep Electric gauges only. For mounting Water Temperature gauge senders or probes in 5/8" heater hose. This kit is ideal for vehicles with limited access to water passage ports on the engine.Installation Instructions

Autometer Brass Adapter Fitting - 1/4in NPT Male / 1/8in NPT Female

1/8" NPT Female to M12x1.75 Male electric temperature or pressure If using with a Short Sweep Electric Temperature gauge, sender #2259 is also required.Installation Instructions

1/8" NPT Female to M12x1.5 Male for electric temperature or pressure Commonly used for electric temperature gauge installation in GM LS engine cylinder heads. If using with a Short Sweep Electric Temperature gauge, sender #2259 is also required...

FITTING, ADAPTER, M12x1.25 BANJO BOLT TO 1/8" NPTF FEMALE, FUEL PRESSUREInstallation Instructions

5/8"-18 UNF Female (adapts directly to sealing nut on AutoMeter Mechanical Temp Gauges) to M16x1.5 MaleInstallation Instructions

5/8" -18 UNF Female (adapts directly to sealing nut on AutoMeter Mechanical Temp Gauges) to 1/2-1/16" NPT Male

5/8" -18 UNF Female (adapts directly to sealing nut on AutoMeter Mechanical Temp Gauges) to 3/8" NPT Male

AutoMeter Fitting Adapter 3/8in. NPT Male Extension Brass For Mech. Temp. Gauge

1/2-1/16" NPT male extension for use with Mechanical Temperature gauges only.

FITTING, ADAPTER, METRIC, 1/8" BSPT MALE TO 1/8" NPTF FEMALE, BRASS

1/8" NPT Female to M16x1.5 Male Commonly used for oil pressure sensor / line installation on GM LS engines when connecting to the port on the top of the block behind the intake manifoldInstallation Instructions