TRACTIONMAX – INSTALLS IN JUST MINUTES
- IMPROVES VEHICLES ACCELERATION AND TRACTION.
- WATERPROOF – RUGGED DESIGN
- PLUG AND PLAY – SIMPLE INSTALL
- REMOTE ADJUSTMENT KNOBS INCLUDED DIAL IN YOUR EXACT THROTTLE AND TRACTION SETTINGS.
- ENHANCE LOW AND MID-RANGE HORSEPOWER TORQUE AND ACCELERATION.
- REDUCE TURBO LAG ELIMINATE STALLING ON MANUAL GEARBOX VEHICLES.
- CAN ALSO BE STACKED WITH OTHER TUNING PRODUCTS TO MAXIMIZE PERFORMANCE.
- DESIGNED AND ASSEMBLED IN THE U.S.A.
EACH KIT CONTAINS: TRACTIONMAX DEVICE PLUG AND PLAY WIRING HARNESS REMOTE ADJUSTMENT KNOBS INSTALLATION KIT ACCESSORIES AND INSTALLATION INSTRUCTIONS
AUTOMATED TRACTION FEATURE – TURN ON THE FEATURE BY INSTALLING THE THREE PIN JUMPER (INCLUDED).
- TYPICALLY THIS FEATURE WOULD BE USED BY A VEHICLE WITH A MANUAL TRANSMISSION.
OVERVIEW: TRACTION CONTROL WORKS ONCE AND THEN IT IS LOCKED OUT FOR 20 SECONDS.
USAGE EXAMPLE:
- LAUNCH IN FIRST GEAR – TRACTIONMAX CONTROLS THE RATE OF ACCELERATION TO KEEP THE TIRES FROM SPINNING.
- TRACTIONMAX LOCKOUT FOR THE NEXT 20 SECONDS &MDASH THE THROTTLE FUNCTIONS LIKE NORMAL.
- DURING LOCKOUT GEARS CAN BE SHIFTED AND THE THROTTLE RESPONDS LIKE NORMAL.
NOTE: TO ENABLE LOCKOUT YOU MUST GO TO WOT (WIDE OPEN THROTTLE).
- AFTER 20 SECONDS THE TRACTION CONTROL FEATURE IS RE-ENABLED.
ON-THE-FLY TRACTION FEATURE – TURN ON THE FEATURE BY INSTALLING THE THREE PIN CONNECTOR WITH TWO WIRES.
- CONNECT THE TWO BLUNT WIRES TO A MOMENTARY SWITCH OR REGULAR SWITCH.
- FEATURE IS ACTIVATED WHEN THE TWO WIRES ARE CONNECTED TOGETHER.
- TYPICALLY THIS FEATURE WOULD BE USED ON A VEHICLE WITH AN AUTOMATIC TRANSMISSION.
OVERVIEW: TRACTION CONTROL IS DISABLED WHEN THE TWO WIRES ARE CONNECTED TOGETHER.
USAGE EXAMPLE:
- LAUNCH VEHICLE – TRACTIONMAX CONTROLS THE RATE OF ACCELERATION TO KEEP THE TIRES FROM SPINNING.
- PUSH THE ON-THE-FLY TRACTIONMAX LOCKOUT BUTTON WHEN YOU WANT THE THROTTLE TO FUNCTION LIKE NORMAL.
ALTERNATIVE USAGE:
- CONNECT THE TWO WIRES TO A TOGGLE SWITCH.
- TURN TRACTIONMAX ON/OFF USING THE TOGGLE SWITCH
- AUTOMATED TRACTION LOCKOUT FEATURE – THIS FEATURE IS ENABLED WHEN THE CUSTOMER PLUGS IN THE AUTOMATED LOCKOUT ENABLE JUMPER (INCLUDED).
- ON-THE-FLY TRACTION LOCKOUT FEATURE
- USE YOUR OWN BUTTON OR SWITCH TO ENABLE OR DISABLE THE TRACTION CONTROL FEATURE.
- WIRING TO CONNECT YOUR OWN CONTROL BUTTON IS INCLUDED OR YOU CAN UPGRADE TO THE OPTIONAL (SOLD SEPARATELY) JMS CONTROL BUTTON.
