Camber Kits

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Air drill driven tool made to cut out the spot welds holding the original equipment alignment plate to the top of strut towers. Once the plate is loosened caster and camber can be adjusted. Sold with 3/8" and 5/16" removable cutters. Use our "Cool...

Adjust rear camber on late model RAV4 and Lexus NX200t with this adjustable rear camber arm. With +-3.0deg of adjustment, this arm will get your vehicle back into factory specification to ensure proper tire wear, handling, and ride quality. Use part...

SPC Performance Replacement Camber Bolt for 67660

Replace damaged or corroded factory adjusters for your Honda or Acura SUV with these replacement cam bolts from SPC. This kit features a hex chromate free finish that offers a 700hr salt spray test for teh best corrosion protection available. One kit is...

This rear bracket and bushing replaces the stock mount on'06 and up Honda Civics. By rotating the eccentric bolt/cam assembly in the bracket you can get +/-1.25 degrees of rear camber change. Use #75980 bushing removal press sleeve set with the #72509...

Correct camber on previously non-adjustable suspensions with this adjustable control arm. The remove and replace design makes the arm ideal for quick and easy alignment adjustment as well as simple chassis part replacement. The adjustable arm has an easy...

Extend the range of rear toe adjustment by +-1.5deg on the rear of the Chrysler LX platform by installing SPC's offset bushing. The OE rear toe cam on the Challenger, Charger, 300, Magnum, and Pacifica gives you a +-1.0deg window of adjustment. This is...

Adjust camber or caster +-.3deg using the factory offset in the lower control arm bushings of the popular Chrysler LX platform. Simply, replace the OE lower control arm bolts with these slotted bolts to achieve the change the factory provides. Need more...

9/16" opening (H/D Trucks). Fits control arm shaft mounting bolts up to 9/16" diameter, including 1/2 Ton - 1 Ton Chevrolet/GMC trucks, HD service. 50 per box. California Residents WARNING

This Zinc plated Caster Camber shim is for front upper control arm suspensions that feature a cross shaft and a 9/16" opening (H/D trucks). Fits control arm shaft mounting bolts up to 9/16" diameter, including 1/2 Ton - 1 Ton Chevrolet/GMC trucks, HD...

This Zinc plated Caster Camber shim is for front upper control arm suspensions that feature a cross shaft and a 9/16" opening (H/D trucks). Fits control arm shaft mounting bolts up to 9/16" diameter, including 1/2 Ton - 1 Ton Chevrolet/GMC trucks, HD...